3017 McEver Road
Buford, GA, US, 30518
Tel:17708310403
2008 Open 6.50
Finot Open 6.50 2008
Full Carbon Fiber High Performance Racer
w/Custom Trailer
Raced less than 10 times in light air conditions.
Brand New Carbon Fiber Mast Never Used
Boat, Mast and Rig Stored Inside
*Full Boat Cover Included*
Specifications
Media Gallery
Finot's Open 6.50 is built using prepeg carbon fiber and a process called "autostruct" which allows the construction of the shell, stringers and reinforcement to be all in one piece. It is then cured using high temperatures and pressures in an autoclave, a technique derived from the aircraft industry, resulting in a stronger and radically lighter boat.
Forty-three percent of the boat's weight is ballast. The low center of gravity gives this sleek sportboat the stability to carry a plenty of sail area. With one of the highest sail area / displacement ratios in its class, this boat exudes horsepower. It's no surprise the 6.50 is the sportboat of choice for some of the most famous and accomplished sailors in the world.
- 2009 300 Sq.Ft. Square Top Main Sail by Delta Voiles w/Crosscut Flex Aramid, Fully Battened (Adjustable) One Reef Point & in Excellent Condition
- 2009 Delta Voiles Overlapping Jib (144%), Crosscut Flex Aramid w/Zip Luff. Works on Harken Furling Drum (Mounted on Boat) & in Excellent Condition
- 2009 Delta Voiles Asymmetrical Medium Air Spinnaker (Reacher & Small Runner)(Black) & 3/4 oz Nylon Superkote V
- 2010 North Sails Superlight 50 Asymmetrical Light Air Spinnaker (Runner), White & Used Once
- 2010 North Sails Airx 600 Asymmetrical Light Air Spinnaker (Reacher), White & Used Once
- T120 Wind Transmitter
- NMEA Interface
- T070 Race Master
- T908 GGPS Antenna
- T221 Mast Rotation Transmitter
Total Package Value w/Installation: $6000
- Carbon Fiber Mast New from Factory
- Diamond Wire for Mast, Carbon Spreaders, Shrouds & Headstay
- Running Rigging Complete w/Main, Jib, Spinnaker Sheets w/All Control Lines for Bowsprit, Outhaul, Cunningham, etc
- Hull, Rudders, Deck, Mast Are All Cabon Fiber
- All Fitting Attachments on Mast & Boom Are Molded Carbon Custom Pieces to Receive Headstay, Shrouds & Sails Adjustment Control Lines
- Stainless Steel A Frame to Lift & Lower Keel
- Lifting Straps for Launching
- Complete Kit of Detachable Life Lines (6 Stanchions w/Spectra Line
- Rope Bags in Cockpit
- North Sails Jib Cover
- North Sails Complete Deck Cover
- Open 6.5 is 8 Ft & 3 Inches Wide & 13 Ft. Wide
- Bunks Are Ergonomic
- Large Cockpit Allows Crew to Move Fore & Aft to Balance the Boat in Different Sailing Conditions
- In Between Races, Lots of Room For Crew to Rest & Stretch Their Legs
- Under the Cabin Roof, Storage Thru Watertight Hatch Keeping Gear Dry
- Can Be Sailed w/only Two, Three & Up to Five Crew Aboard
- Needs Only 3 Crew Members to Handle Efficiently
- With Breeze 12 Knots & Up, a Fourth Crew Member Helps De-Power Upwind & if Flying Spinnaker
- With 6:1 Purchase on Main Sheet Trimming Doesn't Require Much Effort
- Traveler is 5:1
- Tacking the Jib Accomplished by Single Crew Member
- Bowsprit Line Pulls Sprit out Before Launching Spinnaker
- Tack Line Brings The Tack of the Spinnaker to End of Bowsprit
- Spinnaker Halyard (1:1) Requires 3 Good Pulls To Get Kite Up to Spinnaker Hounds
- Hull #17 Comes w/Galvanized Single Axle Trailer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Call cells or text:
Ann Koch 770-540-9796
Sid Hall 470-885-4825
Rich Michel 404-642-3007
Near Beautiful Lake Lanier, NE of Atlanta